Urea

Urea is a neutral quick-acting fertilizer with a chemical formula of CO(NH2)2 and a nitrogen content of up to 46%. ‌‌Urea is a white crystal that is tasteless and odorless, easily soluble in water, ethanol and benzene, and slightly soluble in ether and chloroform. The nitrogen content of urea is the highest among solid nitrogen fertilizers, which makes it a highly efficient nitrogen fertilizer. After application, no harmful substances will remain in the soil, and it has little destructive effect on the soil, so it is widely used. The application methods of urea include as a base fertilizer or topdressing. Urea is decomposed into ammonium carbonate by microbial action in the soil, and ammonium carbonate is easily absorbed by plants, so urea has a rapid fertilizer effect. However, the utilization rate of urea is low, about only 20%-30%, and most of the urea applied to the soil will be lost or volatilized with water. In order to improve the utilization rate of urea, it can be carried o

product description

products center

WHAT IS DIESEL EXHAUST FLUID (DEF)

Diesel Exhaust Fluid (DEF) is a non-toxic, high purity solution comprised of 32.5% urea and 67.5% de-ionized

water for specific use in Selective Catalytic Reduction (SCR) systems. Using this fluid in diesel-powered vehicles, such as

trucks, buses, and tractors, helps to reduce the amount of nitrogen oxides (NOx) emitted into the air by 90%. It is not a fuel additive and must be filled into the dedicated Diesel Exhaust Fluid tank on your diesel vehicle.

SCR/DEF grade urea, automotive grade urea high purity

adblue grade urea

Nitrogen: 46.6%

Moisture: 0.35%

Biuret:0.7%

Particle size(0.85-2.80mm): 94%

Urea 46% or Urea N 46% or Urea prilled or Industry Urea

CAS:57-13-6

Molecular Formula:CH4N2Ol

Molecular Weight:60.06

Melting point:132-135C

Relative density:1.335g/ml at 25C(lit)

How Diesel Exhaust Fluid Works

When injected into the exhaust stream with a specialized dosing module, DEF vaporizes, leaving amonia molecules en route to the catalytic converter; once there, it converts NOx molecules into harmless nitrogen and water vapor-making for cleaner emissions. Making sure you do not run out of DEF in an SCR equipped truck is simple - watch the DEF gauge, which is part of the diesel fuel gauge, for when it is time to refill. DEF is stored in a dedicated tank next to the fuel tank on the driver's side. The tanks range in size from 6 to 23 gallons depending on the truck's application.

Automotive Grade Urea

Automotive Grade Urea is a special, uncoated version of highest purity. It is a main component of urea solutions like Diesel Exhaust Fluid or AUS40/45 which are used within SCR-systems for the reason of NOx reduction. It is the only type of Urea that meets the ISO 22241 specification and the only suitable Urea for the production of DEF/AUS32/ARLA32 solutions. For meeting the ISO 22241 the Urea needs to be of highest purity/quality.

Specification

According to ISO22241 standard
Test Items	Unit	specification
T-nitrogen	%	>46
moisture	%	<0.5
Biuret	%	<0.87
alkalinity(NH3)	%	<0.05
aldehyde	mg/kg	<15.4
insoluble matter	mg/kg	<61.5
PO4	mg/kg	<1.5
Ca	mg/kg	<1.5
Fe	mg/kg	<1.5
Cu	mg/kg	<0.6
Zn	mg/kg	<0.6
Ni	mg/kg	<0.6
Cr	mg/kg	<0.6
Mg	mg/kg	<1.5
Na	mg/kg	<1.5
K	mg/kg	<1.5
Al	mg/kg	<1.5

Factory Showcase

products center

Quality Control Lab

products center

Shipping And Transportation

products center

Delivery Time

Inventory 2-3 working days New manufacturing 7-10 working days

Mode of Transportation
1. By Air, fast but expensive.
2. By Sea, usual and economy.
3. By Train, suit for middle Asia countries.
4. By Express, suit for small package.
We only provide highest quality goods available, accompanied by after support!

FAQ

products center

Q1: What international standards do your products and services comply with?

A1: Our products fully comply with international standards such as REACH, MSDS, and COA, and we strictly implement the ISO9001 quality management system. We can also provide third-party testing reports (SGS, BV, etc.) according to customer needs.

Q2: How long does it take for goods to be delivered to my country?
A2: The delivery time depends on the transport mode and destination country. Generally, sea transport takes 15-30 days, air transport takes 3-7 days, and we will optimize the transport route to shorten the delivery time as much as possible.

Can you provide customs clearance services for dangerous chemicals?
A3: Yes. Our team is proficient in the customs clearance procedures for dangerous chemicals in various countries, and can provide professional compliant declaration and customs clearance services to ensure smooth customs clearance.

Q4: Do you provide customized product and service solutions?
A4: Yes. We can provide personalized product customization and export service solutions according to your specific needs (product specifications, application scenarios, procurement volume, etc.).

products center

Recommendation

products center